Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Access Control Cost in Evergreen?
Gate access control in Evergreen typically runs $350 to $900 for a keypad or card-reader entry upgrade on an existing automatic gate, and $1,200 to $3,500 for a full access-control installation on a gate that doesn’t have it yet. Repairing the access side of a system you already own (a dead keypad, a fob that quit reading, a loop that no longer detects a car) usually lands between $180 and $550. These are estimated ranges for the Evergreen market in 2026, and the written estimate we hand you after looking at the gate is what sets the final price.
We’re Atlas Gate Repair, and gates are the only thing we do. Access control sits right at the heart of that work, because most of the calls we get in Evergreen aren’t about the gate arm itself; they’re about the box that tells the arm when to open. Call (833) 589-9356. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Basic access-control repair in Evergreen: $180 – $550 estimated, per job.
- New keypad or card-reader entry on an existing gate: $350 – $900 estimated.
- Full access-control install (readers, wiring, operator interface): $1,200 – $3,500 estimated.
- We work on access systems for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Estimates are free, and the estimate is what sets the price.
Gate Access Control Cost Breakdown (2026)
Here’s how the work breaks down by job type. Every row is an estimated range for the Evergreen market in 2026, not a quote. Your gate, its operator, and how the wiring runs all shift where in the range you land.
| Job | Typical Estimated Range | What’s Included |
|---|---|---|
| Keypad repair or replacement | $180 – $450 | Diagnose the keypad or its wiring, swap a failed unit, retest codes |
| Remote / fob / receiver repair | $150 – $380 | Re-pair remotes, replace a receiver, sort out interference |
| Vehicle loop sensor repair | $250 – $650 | Test the loop, repair or replace the detector, reconnect to the operator |
| Card reader or proximity reader install | $400 – $1,100 | Mount the reader, run low-voltage wiring, connect to the controller |
| Telephone / intercom entry | $450 – $1,200 | Intercom unit, wiring, connection to the gate operator |
| Full access-control install on an existing gate | $1,200 – $3,500 | Controller, readers, wiring, operator interface, testing |
| Access-control install with a new gate | $3,500 – $9,000+ | Gate, operator, access hardware, wiring, commissioning |
What pushes a job toward the top of a range: distance from the gate to the house or building (longer wire runs mean more labor), a property with multiple gates, a controller that has to talk to more than one type of reader, and older systems where the original installer left no documentation. What keeps it toward the bottom: a single residential driveway gate, an existing operator in good shape, and access hardware that just needs a straight replacement rather than a redesign.
The single biggest cost swing is whether your gate already has a working operator. Retrofitting access control onto a gate that opens by hand means buying an operator too, and that’s a different job with a different number. We diagnose first and tell you honestly what you actually need. Call (833) 589-9356 for a free estimate.
What Affects Gate Access Control Pricing in Evergreen
Access control is one of those jobs where the parts are often cheaper than the labor, and the labor depends on things you can’t see from the street. Here are the factors that move the number most in Evergreen.
- Gate type and weight. A residential swing gate on a Mighty Mule or Ghost Controls operator is a simpler access-control job than a heavy commercial slide gate on a DoorKing or FAAC system. Heavier gates need heavier-duty controllers and more careful wiring. We look at the operator before we quote, not after.
- Brand and age of the system. We’re fluent across nine major gate brands, which means we’re not spending your money learning your system on the clock. If your gate runs LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule, we already know how the access hardware on it is put together and what tends to fail first.
- Wiring distance and routing. Access readers talk to the controller over low-voltage wire, and the farther the reader sits from the controller, the more labor goes into running it. Underground runs across a driveway or to a separate entry point cost more than a short run along a fence line.
- Number of entry points and users. One gate with one keypad is the low end. Multiple gates, a separate pedestrian gate, and a property with a lot of users (a shared driveway, an HOA, a small commercial lot) all add controller capacity and set-up time.
- Whether existing hardware can be reused. Sometimes the reader is fine and the controller is the problem. Sometimes it’s reversed. We test both before recommending anything, because a repair-first approach usually saves you real money over a full swap-out.
- Condition of the gate and operator. Access control can’t fix a gate that drags, binds, or has a failing operator. If the mechanical side needs attention, that work comes first and gets priced honestly alongside the access hardware.
How to Save on Gate Access Control
The best way to keep the number down is to find out what’s actually broken before you replace anything. Access-control failures often trace back to one component: a reader that’s drifted out of alignment, a loop detector that’s misfiring, a controller that lost its programming. Replacing the whole system when a single part is at fault is the most expensive mistake we see. Our job is to figure out which part it is.
A few practical moves that help:
- Get the diagnosis before the quote. A free estimate that identifies the failed part tells you what you’re actually paying for. Call (833) 589-9356 and we’ll come look.
- Repair before you replace. If the access hardware still works, keep it. We tell customers when a repair makes sense and when a replacement does, and we don’t push the bigger job.
- Consolidate trips. If you’ve got more than one gate or reader that’s misbehaving, have us look at all of them in one visit rather than one at a time.
- Know your brand. If you can tell us the brand and model of your gate operator up front, we come prepared with the right parts and knowledge. That’s a real time saver, and time is most of a gate bill.
- Don’t let a small fault grow. A keypad that works intermittently or a gate that sometimes doesn’t respond usually gets worse, and the repair gets bigger. Fix the small thing early.
Every estimate we give is written down, and the written estimate sets the final price. No surprises on the invoice.
What Is Gate Access Control, Exactly?
Access control is the part of an automatic gate system that decides who gets to open it. The gate operator moves the gate; the access control tells the operator when to move. That’s the keypad on the post, the card reader at the commercial entrance, the remote in your car, the vehicle loop under the driveway, or the intercom that lets a guest buzz the house.
When people say “the gate stopped working,” they usually mean the access side. The gate still swings fine when you push the button inside, but the keypad at the curb won’t take the code, or the remote only works when you’re standing in one particular spot. That’s an access-control problem, not a gate problem, and it’s a big part of what we handle. We specialize exclusively in gates: repair, electric systems, and installation. Access control is right in the middle of that.
Repair or Replace: Which Makes Sense for Access Control?
Repair first, almost always. A failed keypad, a dead reader, a blown receiver, or a loop detector that’s stopped sensing cars can all be repaired or replaced on their own without touching the rest of the system. That’s the cheaper, faster path, and it’s what we recommend when the rest of the system is sound.
Replacement starts to make sense when the controller is failing, the system is old enough that parts are hard to source, or you’re adding so many users and entry points that the existing controller can’t handle it. Even then, we’ll walk you through what a repair would cost versus a replacement so you can decide with real numbers in front of you. If your system runs LiftMaster, FAAC, BFT, or Mighty Mule, we already know what a repair looks like on it.
Where Access Control Fails First
The failures tend to cluster. Keypads fail at the buttons and at the wire connection where they meet the post. Vehicle loops fail where they’re cut, or where the pavement above them has cracked. Card readers fail at the seal. Remotes lose their pairing, or interference from nearby equipment makes them unreliable. Controllers lose their programming after a power event.
Knowing where to look is most of the diagnostic work. If your gate won’t open for a keypad code but opens fine from inside, the operator’s healthy and the problem is at the reader. If the gate behaves oddly for every input, the controller or the wiring between the controller and operator is the place to start. We carry the test gear to sort this out on a site visit rather than guessing from the phone.
Frequently Asked Questions About Gate Access Control Cost
How much does gate access control repair cost in Evergreen?
Most access-control repairs in Evergreen run $180 to $550 estimated, depending on the failed part. A simple keypad or remote repair sits at the low end. A vehicle loop or controller repair sits higher. The written estimate sets the final price. Call (833) 589-9356 for a free estimate.
What does a new access-control system cost in Evergreen?
A full access-control installation on an existing automatic gate in Evergreen typically costs $1,200 to $3,500 estimated. A single-reader install on a residential gate sits near the low end. Multiple readers, an intercom, or commercial-grade access sits higher. Call (833) 589-9356 for a free estimate on your gate.
Is it cheaper to repair or replace my gate’s access control?
Repair is almost always cheaper when the rest of the system is sound. A single failed keypad, reader, or loop detector costs far less to replace than a whole controller. Replacement makes more sense when the controller is failing or the system is old enough that parts are scarce. We tell you which way it goes with the numbers in front of you. Call (833) 589-9356.
Can you come out the same day?
In many cases, yes. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 589-9356 and we’ll book the earliest opening that fits. If you call outside dispatch hours, we’ll book you into the next opening, Sunday through Friday, 7am to 7pm.
What brands do you work on for access control?
We work on access systems across nine gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers residential keypad and remote setups through commercial card-reader and intercom systems. Tell us your brand and we’ll show up knowing it. Call (833) 589-9356 for a free estimate.
Why Choose Atlas Gate Repair for Access Control in Evergreen
We’re a gate-only company. Repair, electric systems, and installation, and nothing else. That focus is why we can identify your access system on the first visit rather than troubleshooting by trial and error. When a technician has to figure out what brand your controller is while standing in your driveway, you’re paying for the education. We’ve spent 9 years building the knowledge so you don’t have to.
We work on residential driveways and commercial access control under one roof, and we know both ends of the market: entry-level residential systems like Mighty Mule and Ghost Controls, and commercial-grade systems like FAAC, BFT, Viking, and DoorKing. Diagnosis comes before the quote, and we don’t push replacement when a repair will do.
If you’re not sure whether your gate needs access-control work or something else, that’s exactly the call we want. We’ll take a look and tell you what you’re dealing with, and the estimate is free.
Contact Atlas Gate Repair
Gate access control problems are the kind of thing that gets worse when you leave them, and the sooner we look the sooner you’ll know what it costs to fix. Call (833) 589-9356 for a free estimate on gate access control in Evergreen. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Pricing reflects the Evergreen market as of 2026. Atlas Gate Repair offers free estimates – call (833) 589-9356.
Written by the team at Atlas Gate Repair, serving Evergreen since 2017.
What Our Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Bethany Ackerman"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Matt Reed"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Lucia Ramirez