Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Electric Gate Repair for Evergreen Homeowners
An electric gate that won’t open leaves you stuck on the wrong side of your own driveway. That’s a problem we fix every week in Evergreen. Atlas Gate Repair handles the full range of automatic systems, from residential swing gates on quiet cul-de-sacs to commercial slide operators at Hillsdale Avenue businesses. Our technicians know LiftMaster, FAAC, BFT, and Linear systems well enough to diagnose most failures on the first visit, not after three trips. We answer 24/7, with fast dispatch from 7am to 7pm, and every estimate is free. Call (833) 589-9356 when your gate stops cooperating.
Gate Opener Repair
Gate Opener Repair is what your system needs when the motor runs but the gate barely moves, or when it won’t respond at all. You might hear a hum and nothing happens. The issue is usually in the drive mechanism, a worn capacitor, or a control board that’s lost its programming. We fix all three daily across Evergreen. A typical opener repair runs $180 to $450 depending on the part and the brand, and we quote exact pricing before any work begins.
Residential Opener Diagnostics
Most residential openers on Evergreen driveways are Mighty Mule, Ghost Controls, or LiftMaster units. We check the power path first, then the limit switches and the drive arm. Our repair-first approach means we won’t pitch a replacement when a $40 capacitor fixes the issue.
Opener Replacement Decisions
Sometimes an opener has simply reached the end of its life, especially if it’s a decade old and has been through repeated power surges. We’ll tell you honestly whether repair makes sense or replacement is cheaper long-term. The written estimate sets the final price either way.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair
Automatic Gate Repair covers the whole automated system, not just the motor. If your gate opens when it shouldn’t, stops halfway, or reverses for no reason, something in the automation chain has failed. That could be a safety sensor, a limit switch, or a receiver that’s lost sync with your remote. We repair these systems throughout Evergreen, with most jobs completing in a single visit. Typical automatic gate repairs run $220 to $520 depending on what’s failed.
Sensor and Safety Edge Issues
Modern automatic gates have photo eyes and safety edges that prevent them from closing on a car or person. When these fail, the gate often refuses to close at all, which is frustrating but safe. We test each sensor’s alignment and wiring, then replace only what’s actually bad.
Remote and Receiver Problems
A gate that works from the keypad but not the remote usually points to the receiver or the remote itself. We reprogram, check antenna placement, and replace remotes when necessary. Evergreen’s mild climate means remotes rarely suffer weather damage; failures are usually electronic.
Electric Gate Motor
Electric Gate Motor failure is the most common reason a gate stops moving entirely. The motor is the muscle of your system. When it burns out, overheats, or seizes, the gate won’t budge no matter how many times you press the remote. We replace electric gate motors in Evergreen regularly, and the job typically runs $450 to $1,100 including the new motor and labor, depending on the brand and horsepower.
Motor Replacement by Brand
LiftMaster and FAAC motors are straightforward swaps for us because we know the mounting patterns and wiring harnesses. BFT and Linear motors take a bit more disassembly but follow the same logic. We carry common replacement motors on our trucks to speed up the job.
Signs Your Motor Is Failing
A gate that slows down noticeably over a few weeks, or a motor that runs hot to the touch, is telling you it’s near the end. Strange grinding or clicking when it runs is another warning. Catching it early often saves the gearbox and keeps the repair on the lower end of the price range.
Gate Access Control
Gate Access Control is the system that decides who gets in: keypads, intercoms, card readers, and phone-based entry. When an access control component fails, legitimate visitors can’t get through while the gate itself works fine. We repair and replace access control equipment across Evergreen, from single-family driveway keypads to HOA entry systems with multiple credential types. Repairs typically run $200 to $600 depending on the hardware.
Keypad and Intercom Repair
Evergreen homes with street-facing gates often use keypad entry for deliveries and guests. A keypad that ignores certain digits or an intercom with no audio usually has corroded contacts or a failed wiring splice. We trace the circuit, fix the connection, and test every code before we leave.
Multi-Tenant Access Systems
For HOAs and small commercial properties, access control usually means a card reader or fob system tied to a central controller. When one reader goes down, we can isolate the fault without disrupting the rest of the property. We’re familiar with the common setups used in East San Jose and Silver Creek Country Club communities.
Commercial Gate Operator
Commercial Gate Operator service is for the heavier slide gates and barrier arms that manage vehicle traffic at businesses and apartment complexes. These operators are built for frequent cycles, and when one fails, the result is a backed-up entrance. We repair commercial gate operators in Evergreen and the surrounding area, working early in the morning when business traffic is lightest. Commercial operator repairs typically run $600 to $1,800 depending on the failure and the equipment.
Slide Gate Operator Repair
Slide gates on commercial properties use gear-driven operators that can wear out chains, sprockets, and drive gears over thousands of cycles. We inspect the full drive train, replace worn components, and re-tension the chain to manufacturer spec. A properly maintained commercial operator should run quietly and stop precisely every time.
Barrier Arm and Loop Detector Issues
Parking lot barrier arms often fail because the loop detector in the pavement stops sensing vehicles, so the arm won’t lift. We test loop frequency, repair or replace the loop when needed, and verify the arm’s lowering speed is safe. This is the kind of specialized diagnosis that generalist handymen rarely get right.
Brands We Service
We work on LiftMaster residential and commercial operators daily. We know where the limit switches wear, which boards lose programming after power fluctuations, and how to match a replacement motor to an older gearbox. LiftMaster equipment is common throughout Evergreen, and we keep the most frequent failure parts handled without guesswork.
FAAC and BFT systems are the workhorses of the commercial and high-end residential market. FAAC hydraulic operators have their own failure patterns, usually around the hydraulic pump or the bypass valve. BFT electronic boards are sensitive to voltage drops, and we’ve learned to check the incoming power before condemning the board. Linear makes solid, no-frills residential equipment that often fails at the capacitor or the remote receiver first. Whether you have one of these brands or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Your gate opens halfway and stops. A gate that reverses or stops mid-cycle usually has a failing limit switch, an obstruction the safety sensor is detecting, or a weakening motor. The longer it runs this way, the more strain it puts on the drive components, turning a simple adjustment into a full replacement.
- You hear grinding when the gate moves. Metal-on-metal noise means a gear, chain, or roller is wearing against something it shouldn’t. Ignoring it lets the damage spread to adjacent parts. We catch these early and fix them before the repair bill climbs.
- The remote works intermittently. A gate that opens on the third press is either losing signal, draining a weak battery, or has a failing receiver. Intermittent problems never fix themselves; they become permanent failures at the worst possible moment.
- The gate moves too slowly. A noticeably slower gate usually means the motor is struggling or the drive train is binding. The cause could be low hydraulic fluid on a FAAC, a bad capacitor on a Linear, or a worn gear on a BFT. Each has a different fix, and guessing wastes money.
- You have to press the remote from inside the car. A remote that only works at close range points to a weakened receiver or antenna problem. It might work from the driveway now, but the next failure could leave you outside the gate in the rain.
Our Process, Step by Step
- 1
Call and describe the symptom. When you call (833) 589-9356, we listen to what the gate is doing, what brand it is, and when the problem started. That information helps us bring the right tools and likely parts on the first trip. We answer 24/7, so a late-night failure gets scheduled into the next dispatch window.
- 2
Free on-site diagnosis. We come out to your Evergreen property and test the system methodically: power, controls, safety devices, and the mechanical drive. Our techs carry diagnostic meters and know the failure patterns for each brand we service, so we find the actual problem rather than swapping parts on a hunch.
- 3
Written estimate before any work. You get a clear quote for the repair, with the price broken down by part and labor. Nothing gets touched until you approve the number. If the diagnosis changes once we’re inside the operator, we stop and tell you before any additional work happens.
- 4
Repair with the right parts. We complete the repair, test every function thoroughly, and run the gate through multiple cycles to make sure it’s stable. We adjust travel limits, force settings, and safety edges so the system operates the way the manufacturer intended.
- 5
Final walk-through and payment. We show you what was wrong, what we replaced, and how to operate the gate going forward. You pay the agreed amount from your written estimate. No surprise invoices, no add-on fees.
How Much Does Electric Gate Repair Cost in Evergreen?
Electric gate repair in Evergreen typically runs $180 to $1,800 depending on what’s failed and the type of equipment. A simple opener repair, like a bad capacitor or a misaligned limit switch, lands between $180 and $450. Full motor replacement on a residential gate runs $450 to $1,100. Commercial gate operator repairs, particularly on slide gates with drive train damage, run $600 to $1,800. Every estimate we give is free, and the written quote sets the final price before we start.
Several factors affect the total: the brand of your system, whether it’s hydraulic or electronic, how old the equipment is, and whether the failure damaged surrounding components. A LiftMaster residential operator is usually cheaper to repair than a commercial FAAC hydraulic unit because the parts cost less and the labor is faster. The best way to avoid overpaying is to work with a company that diagnoses the specific problem rather than replacing entire assemblies on a guess. Our free estimate includes the diagnosis, the broken part, the labor, and the testing, so you know the full number before you approve anything. Call (833) 589-9356 for an exact quote on your gate.
Our Service Area Near Evergreen
We work throughout Evergreen and the surrounding neighborhoods. Most calls in Evergreen, electric gate repair requests in East San Jose, and electric gate repair in the Silver Creek Country Club area are scheduled within the same dispatch window. We also cover Willow Glen, Cupertino, Central San Jose, Spartan Keyes, Downtown San Jose, Berryessa, South San Jose, Los Alamitos Creek, and Morgan Hill. For residents closer to the hills, electric gate repair in the Evergreen foothills follows the same pricing and process, just with a slightly longer drive time. Call us and we’ll get a technician headed your way.
Serving Evergreen, CA – Our Local Coverage Area
We serve Evergreen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Electric Gate Repair in Evergreen
Electric gate repair is the diagnosis and fixing of automated gate systems that open, close, or secure a property. It covers the motor, the control board, the safety sensors, the remote receivers, and the mechanical drive components that move the gate. We repair all these parts on residential and commercial systems throughout Evergreen.
Most residential electric gate repairs take 60 to 90 minutes on site once the problem is identified. Simpler fixes like a remote reprogramming or a limit switch adjustment can take under an hour. More involved jobs, like a full motor replacement on a commercial slide gate, run two to three hours. Your estimate includes a time frame so you know what to expect.
Electric gate repair in Evergreen typically runs $180 to $1,800. Opener repairs are $180 to $450, motor replacements run $450 to $1,100, and commercial operator repairs run $600 to $1,800. We give you a free written estimate before any work starts, so the price you approve is the price you pay. Call (833) 589-9356 to schedule a diagnosis.
Yes, we service LiftMaster equipment regularly, both residential and commercial models. LiftMaster is one of the most common brands on Evergreen driveways, and our techs know where these systems typically fail, from limit switches to control boards. We also service FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems.
We offer same-day service for most repair calls in Evergreen. We answer 24/7, and dispatch crews from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Calling early in the day gives us the best chance to get to you before evening.
We stand behind our repair work with a warranty on parts and labor. The specific warranty length depends on the part and the manufacturer’s coverage, and we’ll tell you what it is before we do the work. If anything fails within the warranty period, we come back and make it right.
Clear the area around the gate and the operator so we have access to the motor, the control box, and the gate’s path. If you have remotes or key fobs, have them ready so we can test them. Keep the power to the gate on unless it’s sparking or smoking, because we need to see the system behavior that’s causing the problem. Knowing your gate’s brand and model helps us bring the right parts on the first trip.
Schedule Your Electric Gate Repair Service in Evergreen Today
A broken gate doesn’t fix itself, and it often gets more expensive the longer it runs with a fault. Call (833) 589-9356 for a free, no-obligation estimate. We answer 24/7 with fast dispatch from 7am to 7pm, and we’ll have your gate working right again.
Written by Gus Walsh, Owner at Atlas Gate Repair, serving Evergreen since 2017.