Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Evergreen
Gate repair in Evergreen usually comes down to one thing: the hills. Our team works on sloped, terraced properties every week, so we know exactly what happens when saturated ground shifts a hinge post or throws a swing gate out of plumb. The fix is rarely just a hinge replacement. It’s the footing, the drainage, and the alignment working together. Atlas Gate Repair has served Evergreen since 2017, and our gate repair specialists arrive already knowing your neighborhood’s soil and grading conditions. Call (833) 589-9356 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Evergreen Homeowners Call Atlas Gate Repair for Gate Repair
Nine years working gates, and we still treat every Evergreen driveway as its own project. That’s not a slogan. A gate on a flat lot in Berryessa behaves differently than one on a terraced lot above Silver Creek Valley Road. The slope, the drainage, the age of the posts. All of it changes the repair. Evergreen homeowners call us because we ask about those details before we even arrive.
Local reputation matters here. Evergreen is the kind of place where neighbors talk over fences and recommend tradespeople who actually showed up and fixed the problem. We get calls from Evergreen customers who heard about us from a neighbor on Yerba Buena Road or off San Felipe. Those referrals stick because we diagnose the real cause, not just the symptom. A sagging gate on a hillside is almost never a simple hinge swap.
Response time to Evergreen is straightforward. Our trucks are positioned to reach East San Jose, Evergreen, and the surrounding foothill neighborhoods quickly. When your gate won’t open and your car is stuck behind it, that matters. Call (833) 589-9356. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Evergreen
Wrought Iron Gate Repair in Evergreen is usually about more than the iron itself. The scrollwork and pickets are fine. The problem is underneath. Evergreen’s expansive soils swell in wet winters and shrink in dry summers. A wrought-iron gate bolted to a post that’s heaving in that soil will bind, drag, or refuse to latch. That’s the repair we do most often here. Typical wrought-iron gate repair in Evergreen runs $250 – $600 depending on the hinge condition, post footing, and how far the gate has sagged out of square.
Hinge and Post Correction
On a hillside lot, a wrought-iron gate’s hinge post takes the entire weight of the gate plus the force of the slope behind it. When the post tilts even a few degrees, the gate’s latch side drops and drags. We lift the gate, replace or reset the post in a properly drained footing, and realign the hinges so the gate swings clean again. This is the job that fixes the symptom and the cause.
Sag and Latch Alignment
Wrought-iron gates on older Evergreen homes often have original hardware from the 1980s or earlier. The hinges wear, the welds fatigue, and the latch stops meeting the strike. We repair and reinforce the existing frame where it makes sense. If the steel is too far gone, we tell you honestly and price a replacement before any work starts.
Metal Gate Repair in Evergreen
Metal Gate Repair in Evergreen covers steel, aluminum, and mixed-material gates that have fallen out of alignment or rusted through at the joints. Evergreen’s summer heat expands metal. Winter rain gets into every scratch and seam. Over years, that cycle loosens pickets, cracks welds, and corrodes the lower rail where water pools. Typical metal gate repair in Evergreen runs $200 – $550, depending on whether we’re welding, reinforcing, or replacing the bottom rail.
Rust and Weld Repair
The lowest section of a metal gate takes the most abuse here. Rain splash, irrigation overspray, and soil contact keep that rail damp for months. We cut out rusted sections, weld in new steel where the frame is sound, and grind and coat the repair so it doesn’t re-rust in one season. If the gate is structural, not decorative, we’ll tell you before we weld.
Track and Roller Repair
Sliding gates are common on Evergreen’s wider hillside driveways. When the track gets choked with soil or the rollers flatten, the gate shudders or stops entirely. We clear the track, replace worn rollers, and set the gate’s weight evenly. A sliding gate that fights the track will kill its operator motor over time. Fixing the mechanical side protects the electrical side.
Trusted Brands We Service in Evergreen
Evergreen driveways carry a mix of systems. We see DoorKing operators on older estate gates, Mighty Mule and Ghost Controls on DIY-installed residential gates, and LiftMaster on newer or retrofit jobs. Our technicians know the quirks of each. That matters when a DoorKing limit switch fails differently than a Mighty Mule one. We stock common boards, sensors, and remotes so most Evergreen repairs don’t wait on a parts shipment. No guessing. No reading the manual in your driveway.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Evergreen Homes
- Hinge posts heaving out of the ground after a wet winter. Expansive soil lifts the post, the gate drops, and the latch stops catching. Deeper footings with proper drainage fix it.
- Wood gates swelling in winter rain. A cedar or redwood gate on an Evergreen hillside can swell enough that the latch side drags on the apron. We plane, reset, or add clearance to account for the seasonal cycle.
- Automatic gate operators failing after storms. Power cuts scramble limit settings, and misaligned photocells from windblown debris stop the gate mid-cycle. A full reset and sensor realignment usually brings it back.
- RV and side-yard gates on slopes binding at the hinge. Long, heavy gates with the latch post sitting lower than the hinge post suffer more than flat-lot gates. We correct the geometry, not just the hardware.
Pricing for Gate Repair in Evergreen, CA
Gate repair pricing in Evergreen runs from about $200 for a minor realignment to $600 for a hinge post reset with a new drained footing. Operator repairs and electrical diagnosis typically land between $250 and $700. Heavier structural work, like rebuilding a rusted steel frame or converting a manual gate to automatic, goes higher and gets bid per job after we see the gate in person. The written estimate sets the price. It’s free, and the number we quote before work starts is the number you pay. Call (833) 589-9356 and we’ll put a number on it.
We Also Serve Cities Near Evergreen
Atlas Gate Repair is based in Evergreen, and our crews work the surrounding foothill and valley communities every week. If you’re in East San Jose, Berryessa, Silver Creek Country Club, or Central San Jose, the same team and the same honest diagnosis are available. Gate repairs outside Evergreen still get the same free estimate and written price before any work begins.
Serving Evergreen, CA – Our Local Coverage Area
We serve Evergreen and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Evergreen
Your gate drags in winter because Evergreen’s expansive soils absorb rain and lift the hinge post. That drops the latch side of the gate onto the driveway apron. The ground settles again in summer, and the gate seems fine. The real fix is resetting the post in a deeper, drained footing so seasonal moisture stops moving it. Call (833) 589-9356 for a free estimate.
Most automatic gate operators have a manual release key or handle near the motor housing. The exact location depends on the brand: DoorKing releases differ from LiftMaster releases. If you have to work around the operator’s wiring or power supply during a cut, leave that part to a trained professional. We can walk you through the release over the phone at (833) 589-9356. We answer 24/7.
Check the power source first. A tripped breaker or GFCI outlet is the most common storm failure. After that, look at the safety photocells. Wind and rain knock them out of alignment, and the gate refuses to move. If those two are fine, the limit settings probably scrambled during the power interruption. That’s a fast fix for a technician who knows the brand. Call (833) 589-9356 and we’ll diagnose it.
Yes. A sagging wrought-iron gate on an Evergreen hillside is usually a footing problem, not a metal problem. We lift the gate, correct the post that heaved or tilted, and realign everything so the gate clears the apron. On a terraced driveway in the Silver Creek Valley area, we did exactly that: the hinge post had heaved from saturated soil, so we replaced the footing with a deeper, drained base and realigned the operator. The gate now clears by a full inch through the rainy season. Free estimates: (833) 589-9356.
Ahead of the first winter rains, have the gate’s alignment checked, the hinges inspected for wear, and the post footings looked at for drainage. Clear the operator track or gear of debris, and test the photocells. On Evergreen’s sloped lots, this is the difference between a gate that clears all winter and one that starts dragging in January. We’re happy to do it as a one-time visit, priced per job after we see the gate. Call (833) 589-9356.
Written by Gus Walsh, Owner at Atlas Gate Repair, serving Evergreen since 2017.